Manufacturing method of rescue boots
Rescue BootsIt is a rescue boot worn by firefighters and high-temperature workers during fire scene rescue and high-temperature operation. The sole is made of natural rubber, which is soft, wear-resistant and not deformed. It is provided with waterproof rubber strips to prevent water from entering the shoe. The side seam bottom is not easy to break the wire. It is light in weight. Each pair of rescue boots weighs less than l.5 kg and has heat insulation performance. When the heat insulation test of the rescue boots is heated for 30min, the temperature rise is lower than 22, the rescue boots began to slide under the condition of anti-skid performance test, so let's learn how to make the rescue boots together!
15 degrees can be achieved before and after anti-skid, the practical for a variety of rescue situations facing the problem has been improved.
In the use of emergency rescue boots on the market, they are easy to be injured when colliding with hard and sharp ones, the overall fire-resistant and flame-retardant effect is low, the wear resistance of frequently working areas is poor, the wear and tear is easy to occur, the relative position is difficult to judge under the condition of dark action, the shoelace is easy to disengage, the shoelace is easy to break when being burned by sparks, and is not suitable for fire fighting occasions, it is easy to fall off when it cannot be worn, and the slip resistance is not good, so a more practical solution is proposed
Implementation elements of rescue boot technology:
The purpose of the utility model is to solve the damage that is easy to be suffered when colliding with hard or sharp objects proposed in the above background technology. The whole has low fire resistance and flame retardant effect, and the wear resistance of the area that works frequently is poor, and it is easy to wear and break. It is difficult to judge the relative position when it is too dark. The shoelace outside the shoelace is burned by sparks and is easy to break, which is not suitable for use in fire, can not wear the case is prone to fall off between the upper and lower, excellent anti-slip, non-slip multi-functional rescue shoes
In order to achieve the above object, the utility model provides a sole, which is provided with a waterproof edge surface on the upper side, a cushioning elastic surface is fixed on the front side of the waterproof edge surface, an upper boot surface is fixed on the upper end, and the rear end of the upper boot surface is connected to the fireproof outer wall. A fluorescent seal is arranged on the rear side of the fluorescent seal and fixed on the outer surface of the rear stop edge surface with wear-resistant rubber, A buckle is installed at the front end of the back stop edge surface, an adhesive tape is arranged on the inner side of the back stop edge surface, an expansion surface is arranged on the rear side of the adhesive tape, and the left and right ends of the expansion surface are connected There is a tension belt, and a port rubber pad is arranged on the inner side of the front end of the back stop edge surface. Compared with the prior art, the beneficial effects of the present invention are as follows
The multi-functionRescue BootsIt is provided with a waterproof edge surface and a buffer elastic surface, and an elastic protective material is provided at the front end through the waterproof edge surface and the buffer elastic surface, which can reduce the overall damage of the elastic force when colliding with hard objects or sharp objects, and protect the toe when hard objects collide. And damage when impacted
This multifunctional rescue boot is equipped with a fireproof exterior wall and fluorescent stickers. The fireproof exterior wall and fluorescent stickers are used to paste waterproof materials on the outer edges to improve the wading effect and waterproof effect. In addition, a fireproof outer wall is provided, which can prevent heat transfer, prevent continuous burning of the surface, and improve the durability of the whole under severe rescue conditions through the fire resistance of the gas itself. At the same time, a fluorescent seal is provided, so that users can identify each other's positions under a weak light source when working at night.
The rescue boots are provided with wear-resistant rubber and a rear hardened surface. The wear-resistant rubber and the rear hardened surface can strengthen the area with more deformation activities and improve the wear resistance. In addition, it can be fixed by adhesive tape, which is convenient to use compared with shoelaces. It is provided with a buckle and a rear hardened surface, which can prevent natural loosening and falling off after fixing and play a role in fixing the end of the adhesive tape.
The multi-functional emergency rescue boots are set through the tension belt on the expansion surface, and by penetrating the tension belt on the expansion surface and stretching elastically, the tension of the shoelaces can be worn without adjusting the tension of each other. In addition, by providing the mouth glue and the expansion surface, it can be slid off in such a way as to clamp the lower leg surface when wearing.
It is provided with a synthetic rubber layer and a concave ring groove. The bottom side groove is pressed by the synthetic rubber layer and the concave ring groove to shrink it to the inside, which can have better grip. In addition, there are soles and anti-skid grooves, which can improve the ground The friction force improves the anti-skid effect.
The above introduction isRescue BootsIf you need to know more, please feel free to contact us!
In the midsummer of Beijing, the sun is shining brightly and the sky is clear. The Chinese Communist Party History Exhibition Hall stands tall and magnificent.
Ding Xuexiang attended and delivered a speech at the "two excellent and one first" commendation meeting held by the central and state organs.
Beijing, 24 Jun (Reporter Meng Xiangfu) -- the commendation meeting for outstanding Communist Party members, outstanding party affairs workers, and advanced grass-roots party organizations of the central and state organs was held in Beijing on 24 June. Ding Xuexiang, member of the Political Bureau of the CPC Central Committee and secretary of the Working Committee of Central and State Organs, attended the meeting and delivered a speech.
Members of the Party Group of the Standing Committee of the National People's Congress and Party Members and Cadres of the National People's Congress
Xinhua News Agency, Beijing, 21 Jun (Reporter Chen Fei) -- members of the party leading group of the standing Committee of the National people's Congress and party members and cadres of the organs of the National people's Congress attended a party history class in Beijing on the afternoon of 21 June to listen to a special guidance report on the study and education of party history on "why the Communist Party of China can. Li Zhanshu, member of the Standing Committee of the Political Bureau of the CPC Central Committee, chairman of the Standing Committee of the National People's Congress and Secretary of the Party group, attended the meeting.
On June 24, the Information Office of the State Council released the white paper "the great practice of the Communist Party of China in respecting and protecting human rights", which systematically explained the achievements of the Communist Party of China in respecting and protecting human rights in the 100 years since its founding. On the same day, the Information Office of the State Council held a briefing to introduce the CPC's concept and practice of respecting and protecting human rights and answer questions from reporters.
China Central Radio and Television Launches Thematic Publication to Celebrate the 100 Anniversary of the Founding of the Communist Party of China
Beijing, June 25 (reporter Liu Yang) the launching ceremony of the theme publication to celebrate the 100 anniversary of the founding of the Communist Party of China was held in Beijing on June 25. Shen Haixiong, deputy director of the Central Propaganda Department, director and editor-in-chief of China Central Radio and Television, attended the meeting.